Spray sterilizer tunnel machine for juice milk brick bottle
Production capacity: 4000 bottles / hour 500 ml
Work rate: 15kW (excluding cold water tower and related pump power)
Product outlet temperature: 35-400C
Water consumption: circulating water (bring your own cold water tower)
Dimensions: 10000 × 2000 × 1500mm
The spray sterilizer is designed based on the absorption of German advanced technology. It adopts circulating warm water preheating, circulating hot water sterilization, and the circulating warm water is cold. It is then sprayed with cooling water to spray and cool. The four-stage treatment form has automatic sterilization temperature control. , Sterilization time adjustable frequency and other advantages, can be widely used in a variety of bottled, canned acidic fruit juice drinks, electrolyte drinks, alcohol, condiments and other products of sterilization cooling. This equipment can be designed according to the sterilization conditions and output requirements proposed by the user.
(Can be customized according to customer bottle type and output requirements)
The packaging bottles conveyed by the conveyor belt are discharged at the entrance of the equipment. They enter the temperature zone for pre-heating at 85 ° C, and then enter the second temperature zone for sterilization temperature for 15 minutes. The third, fourth, and fifth temperature zones gradually cool, and at the exit section With clean water spray, the outlet temperature reaches 350C.
1. Spray sterilization cooler includes:
--- Chain Network
--- Water tank
The rack consists of the following parts:
--- 304 stainless steel body
---- 304 stainless steel feet and foot plate
The main body of the frame is welded from 304 stainless steel. The surface of stainless steel square steel is sandblasted and sanded. The end faces and welding grooves are processed by precision machine tools. The support of the foot plate, the foot and the foot plate are made of 304 stainless steel, processed by precision machine tools.
3, the fuselage
The fuselage consists of the following parts:
--- 304 stainless steel plate body-The main body of the body is made of 304 stainless steel plate, which is welded by argon arc after large bending. The thickness of the stainless steel plate is not less than 2mm, and the surface is sand-polished; . The fuselage is precisely connected with the rack support beam bolts, tightly combined, high strength, and difficult to deform.
4 、 Chain Network
--- The chain net adopts high molecular polyethylene nylon chain net, which is fast to connect and easy to replace. It has excellent high temperature resistance and does not deform; it has good self-lubricating effect during operation, is not easy to wear, and has a long service life.
The nozzle is made of 304 stainless steel through precision machining by a machine tool, with beautiful appearance and reasonable hole diameter; it is installed on the distribution pipe, and the spray angle is accurate and reasonable.
6 、 Water tank
This part is composed of a water storage tank, a pump and a pipeline, which completes the cooling medium supply of the entire equipment; after supplying the distribution pipe, the cooling medium is ejected from each nozzle to achieve the purpose of product cooling. Water-saving process piping design, the next-level water tank supplies the cooling medium to the upper-level water tank.
A. The whole machine is made of 304 stainless steel, which is beautiful and anticorrosive.
B. Shanghai Lisheng polymer heat-resistant chain net.
C. KONE motor reducer.
D. The water pump is Nanfang Pump Industry.
1.Each temperature zone has a manhole for easy cleaning of the chain.
2.The sewage outlet is as low as possible, and the diameter of the sewage outlet pipe is not less than 40 mm.
3. The top cover is made into a single layer.
4. A pressure gauge is installed at the pump outlet.